Choose language: Italiano English Fran¸aise Deutsch Español русский Nederlands Magyar Polski Română

PROFESSIONAL HOSE-REEL IRRIGATOR

Major xj

“RolStop™” automatic reel locking system to prevent the hose from slackening off if no water is supplied. Acts straight on the reel without stressing the gearbox unit.
Automatic braking system for hose unwinding operation.
Electrostatic coating in a double layer without solvents, followed by stove enamelling.
Turbine with built-in by-pass, stainless steel turbine shaft, direct coupling with the gearbox unit and turbine shaft with oil-cooled “class A” taper roller bearings.
4-speed gearbox unit, power take-off for rapid hose rewinding. All the bearings and reductions are oil-cooled. Quick-control “PowerSafe™” turbine by-pass operating linkages for practical and fast gear shifting.
Fully automatic “VertLift™” system to lift the trolley at the end of the rewinding operation, so as to set the trolley in a perfectly vertical position during the end of irrigation phase: exclusive from RM.
Safety device that automatically blocks the reel if the hose accidentally unwinds or winds in a misaligned way.
Trolley with variable track and wheels with adjustable height equipped with a pair of cast iron wheels or 4 tyred wheels on an equalizing bar. Hot-dip galvanized, strong construction, can be towed by the tractor’s power lift.
A speedometer (m/h) constantly monitors the rewinding speed.
Automatic compensator  to guarantee that the trolley returns at a constant speed.
Double water inlet with large-diameter BAUER 133 couplings to prevent throttling and unnecessary pressure drops.
Lost of care has been taken with the protections, which have all been made in compliance with the accident-prevention standards.

PHOTOGALLERY

Major xj
Major xj
Major xj
 
Major xj
   

Images represented in this section are taken from the historical archive of RM therefore they might represent equipment which do not fully comply with the new EU regulations.
These pictures are intended to be images able to clarify the operating principle and the performance quality of the pumps; it is also underlined that current machines are represented exclusively in the Catalogue section.

TECHNICAL DATA

Pipe Ø mm 120 125 135 140 150 160

Recommended hose length m 700 600 520 500 450 350

Available max. length m 730 650 550 520 490 380

Flow capacity
m3/h 29÷96 44÷120 44÷160 52÷175 55÷180 55÷180

Suggested nozzle
Ø mm 22÷32 24÷36 24÷40 26÷42 26÷44 26÷44

SIZES

Sizes

A B C D E F G Kg

3100 2500* 3800* 6800 3800* 3950 4300 7500**

* minimum measures for transport
** Ø 150/450 mm

DOCUMENTS

Catalog
Technical manual
 
Pluviometric charts
Download high resolution photos

INCLUDED AS STANDARD

Coppia lampeggianti per macchine con larghezza inferiore a ml. 2,55
4-wheels double axle
Hydraulic rear legs and automatic lifting of trolley with quick joints to the tractor
Hydraulic jack with distributor
Hydraulic rotation of the machine
 

OPTIONALS

Yanmar diesel engine for hose rewinding with electric starting, with hydrostatic transmission with compensatingvalve and switch for hydraulic services (without turbine)
Yanmar diesel engine for hose rewinding withelectric starting, with hydrostatic transmission with compensating valve, switch for hydraulic services, with turbine and by-pass on drum inlet
Device for automatic stop of Yanmar engine in case of lack of water pressure
Launtop engine instead of Yanmar engine for accessories 1 and 2
Hydraulic power pack driven by HP 5,5 Briggs & Stratton internal-combustion engine mounted on the machine
Hydraulic power pack driven by HP 5,5 Briggs & Stratton internal-combustion engine with electric starting
Hydraulic power pack driven by HP 5,5 Briggs & Stratton internal-combustion engine with electric starting for hose-reel irrigation machines with Rainmaster/Matermacc speed programmer.
Supplementary rewinding through hydraulic engine on PTO with quick joints to the tractor
Slurry inlet after turbine with valve toexclude the turbine
Increase for galvanised wheel
Galvanised upper and lower chassis
3 inch Quick discharge valve for shut-offby depression
4 inch Water inlet shut-off valve
Directional andballasting disks each 16 kg. for sprinkler trolley
Castiron wheels to replace the standard ones on the trolley all models
4 Rubber tyres for trolley to replace the standard ones
4 Wheels (2 tyres and 2 castiron wheels) instead the standard ones
4 Cast iron wheels for trolley to replace standard ones
3 inch Shut-off valve on the trolley
3 inch Gate valve with ball joint
4 inch Gate valve on the trolley
Trolley with adjustable height legs and wormscrew winch to be added to the normal sprinkler trolley
Kit for underleafage irrigation to be assembled on carriage, made of 5 fixed spouts
Kit for underleafage irrigation made of 5 K1 teso sector sprinklers
Kit for overleafage irrigation to be assembled on carriage made of extension, hitches, gaskets and bolts
Kit for trolley for lateral unwinding
Offset drawbar for trolley
Drawbar for trolley
4-Wheels ditch trolley with large depth capacity, wheels lifting and hydraulic trolley lifting
Vacuum pump for rapid emptying of hose
Inlet filter to the machine for Bauer joints
Rainmaster 2.6programmer to adjust and control rewinding speed up to 8 different speeds, continuous measurement of unwound hose, programming and indication ofirrigation time, initial pause, final pause
Rainmaster 2.6 speed programmer for machines with kit Yanmar/Launtop engine
4 inch Electromechanical stop valve for Rainmasterr 2.6
2 or 3 inch Electromechanical discharge valve for Rainmaster 2.6/Nortoft
Counting anemometer for Rainmaster 2.6
Optical signaller for irrigation end forRainmaster 2.6
Solar panel for programmer
CONSTANT RAIN 7 programmer for speed adjusting and control without underpressure or overpressure valve, with solar panel and pressureswitch
CONSTANT RAIN 7 programmer for speed adjusting andcontrol without underpressure or overpressure valve, with solar panel and pressure switch
PROGRAM RAIN 10 programmer for speed adjusting and control without underpressure or overpressure valve, with solar panel and pressureswitch
PROGRAM RAIN 10 programmer for speed adjusting andcontrol without underpressure or overpressure valve, with solar panel and pressure switch
4 inch DN100 overpressure valve on Constant Rain 7 or Program Rain 10.
Control system throught GSM phone
Control system throught GSM phone for Program Rain 10 mounted on machines withYanmar/Launtop engine
GSM control system (not including phone and SIM card) for Rainmaster 2.6
GSM amplified antenna for GSM kit on Rainmaster
Stainless steel box for programmer
Stainless steel box for programmer
Battery charger for winter season 220V - 12V - 0,5A
Omologazione stradale
4 inch Water meter
Hydraulic rotation of the machine
Spout extension 0,50m complete wit bolts and gaskets
Auxiliary sector irrigator on carriage with manual controls
Auxiliary K1 teso sprinkler driven by Rainmaster speed programmer
Electronic tachometer, instead of the standard model
Complete electric installation with no. 1 turning light
Towing hook type Germany
Equipment with removal of RM mark and protections without RM
Treated turbine for heavy waters
Double ballast for trolley
Candelstick support for double gun
Regolazione idraulica in larghezza del carrello
Brands