Choose language: Italiano English Fran¸aise Deutsch Español русский Nederlands Magyar Polski Română

PROFESSIONAL HOSE-REEL IRRIGATOR

MajorGX

Hydraulic turbine with shuttered flow and built-in by-pass: it guarantees continuous operation without tearing even when the water contains considerable impurities. Constructed without filters, there is minimum loss of pressure, enabling even cess pool contents to be sprayed.
Operations: all motor reduction units are closed in a oil-bathed case patend RM on which the driving levers are placed. Turbine mounted on the gearbox (4 speed).
Power take-off: it allows the hose to be rewound quickly with the tractor.
Automatic stopping: end of run, independent of water passage, which allows irrigation to continue even after stopping, so as to create a line depression through a supplementary-valve to stop the pumping unit.
Wheeled sprinkler trailer: with variable trak,  zinc-plated.
Metre-counter: a electronic tachymeter calibrated in ml/h makes it possible to check the hose’s re-entry speed at any moment.
Automatic lifting of trolley, telescopic hydraulic feet, hydraulic quick drawbar hydraulic rotacion.
Double axle with four wheels with 15.0/55-17 tyres.

PHOTOGALLERY

Major GX
Major GX
Major GX
 
Major GX
Major GX
Major GX
 
Major GX
Major GX
 

Images represented in this section are taken from the historical archive of RM therefore they might represent equipment which do not fully comply with the new EU regulations.
These pictures are intended to be images able to clarify the operating principle and the performance quality of the pumps; it is also underlined that current machines are represented exclusively in the Catalogue section.

TECHNICAL DATA

Pipe Ø mm 110 120 125 135 140

Recommended hose length m 680 670 650 520 480

Available max. length m 720 700 670 540 500

Flow capacity
m3/h 29÷90 40÷130 44÷140 44÷160 52÷175

Suggested nozzle
Ø mm 20÷28 24÷34 24÷36 24÷40 26÷42

SIZES

Dati Tecnici

A B C D E F G Kg

2800* 2200 4400 7550 3500* 3760 4320 6900**

2800* 2200 4400 7550 3700*** 3960*** 4490*** 7000**

* minimum measures for transport
** Ø 125/450 mm

*** With hose ø 25 from 630 metres to 670 metres or ø 20 from 650 metres to 700 metres

DOCUMENTS

Catalog
Technical manual
 
Pluviometric charts
Download high resolution photos

INCLUDED AS STANDARD

Galvanised upper and lower chassis.
Double drive chain
Pair of flashing lights with a width lower than 2.55 ml
Doppio assale su 4 ruote.
Hydraulic rear legs and automatic lifting of trolley with quick joints to the tractor.
Hydraulic jack with distributor.
Hydraulic rotation of the machine
 

OPTIONALS

Yanmar diesel engine for hose rewinding with electric starting, with hydrostatic transmission with compensatingvalve and switch for hydraulic services (without turbine)
Yanmar diesel engine for hose rewinding withelectric starting, with hydrostatic transmission with compensating valve, switch for hydraulic services, with turbine and by-pass on drum inlet
Device for automatic stop of Yanmar engine in case of lack of water pressure
Launtop engine instead of Yanmar engine for accessories 1 and 2
Hydraulic power pack driven by HP 5,5 Briggs & Stratton internal-combustion engine mounted on the machine
Hydraulic power pack driven by HP 5,5 Briggs & Stratton internal-combustion engine with electric starting
Hydraulic power pack driven by HP 5,5 Briggs & Stratton internal-combustion engine with electric starting for hose-reel irrigation machines with Rainmaster/Matermacc speed programmer.
Hydraulic power pack drivern by Honda GX 160 engine (HP 5,5) mounted on the machine
Supplementary rewinding through hydraulic engine on PTO with quick joints to the tractor
Slurry inlet after turbine with valve toexclude the turbine
Increase for galvanised wheel
Galvanised upper and lower chassis
3 inch Quick discharge valve for shut-offby depression
4 inch Water inlet shut-off valve
Directional andballasting disks each 16 kg. for sprinkler trolley
Castiron wheels to replace the standard ones on the trolley all models
4 Rubber tyres for trolley to replace the standard ones
4 Wheels (2 tyres and 2 castiron wheels) instead the standard ones
4 Cast iron wheels for trolley to replace standard ones
3 inch Shut-off valve on the trolley
3” Gate valve with ball joint.
4” Gate valve on the trolley.
Trolley with adjustable height legs and wormscrew winch to be added to the normal sprinkler trolley
Kit for underleafage irrigation to be assembled on carriage, made of 5 fixed spouts
Kit for underleafage irrigation made of 5 K1 teso sector sprinklers
Kit for overleafage irrigation to be assembled on carriage made of extension, hitches, gaskets and bolts
Kit for trolley for lateral unwinding.
Offset drawbar for trolley
Drawbar for trolley
4-Wheels ditch trolley with large depth capacity, wheels lifting and hydraulic trolley lifting
Vacuum pump for rapid emptying of hose
Inlet filter to the machine for Bauer joints
Rainmaster 2.6programmer to adjust and control rewinding speed up to 8 different speeds, continuous measurement of unwound hose, programming and indication ofirrigation time, initial pause, final pause
Rainmaster 2.6 speed programmer for machines with kit Yanmar/Launtop engine
4 inch Electromechanical stop valve for Rainmasterr 2.6
2 or 3 inch Electromechanical discharge valve for Rainmaster 2.6/Nortoft
Counting anemometer for Rainmaster 2.6
Optical signaller for irrigation end forRainmaster 2.6
Irrifert device for liquid fertilizer
Discharge valve/stop switch
Hydraulic adjustment of trolley width by means of manual pump
Guard with transparent paint on galvanized frames
Solar panel for programmer
CONSTANT RAIN 7 programmer for speed adjusting and control without underpressure or overpressure valve, with solar panel and pressureswitch
CONSTANT RAIN 7 programmer for speed adjusting andcontrol without underpressure or overpressure valve, with solar panel and pressure switch
PROGRAM RAIN 10 programmer for speed adjusting and control without underpressure or overpressure valve, with solar panel and pressureswitch
PROGRAM RAIN 10 programmer for speed adjusting andcontrol without underpressure or overpressure valve, with solar panel and pressure switch
4 inch DN100 overpressure valve on Constant Rain 7 or Program Rain 10.
Control system throught GSM phone
Control system throught GSM phone for Program Rain 10 mounted on machines withYanmar/Launtop engine
GSM control system (not including phone and SIM card) for Rainmaster 2.6
GSM amplified antenna for GSM kit on Rainmaster
Stainless steel box for programmer
Battery charger for winter season 220V - 12V - 0,5A
Road type approval
4 inch Water meter
Spout extension 0,50m complete wit bolts and gaskets
Auxiliary sector irrigator on carriage with manual controls
Ancillary irrigator for River controlled by Rainmaster programmer
Electronic tachometer, instead of the standard model
Complete electric installation with no. 1 turning light
Towing hook type Germany.
Equipment with removal of RM mark and protections without RM
Treated turbine for heavy waters
Double ballast for trolley
Candelstick support for double gun
Brands